Structured Cable System

Structured Cabling System is a standardized, organized network infrastructure that integrates all voice, data, video, and building management systems into one completed setup.

We connect everything—from high-tech offices to tough outdoor job sites—making sure your internet and data stay fast and reliable, no matter how much technology changes in the future.

Copper Cabling Solutions

From next-generation data centers to residential applications, our copper infrastructure delivers performance at every scale.

01

Cat 5/5E
Legacy entry-level solutions supporting 100 Mbps, ideal for older residential voice and data applications.

02

Cat 6/6A
Industry standard solutions supporting 1 Gbps (up to 250 MHz), ideal for reliable connectivity in general office environments.

03

Cat 7/7A
Shielded enterprise solutions supporting 10 Gbps (up to 600 MHz), ideal for noise-sensitive environments requiring high interference protection.

04

Cat 8/8A
Advanced hyper-scale data center solutions supporting 40 Gbps (up to 2,000 MHz), ideal for critical low-latency links in top-tier facilities.

Rack Solutions

Network Rack
Specifically built to house switches and routers, these Wall Mount (7U–18U) and Floor Stand (12U–47U) cabinets feature extra width in 600x600mm or 800x800mm footprints to manage large bundles of internet cables.
Server Rack
A high-strength, extra-deep cabinet engineered to safely hold heavy servers and handle the heat they generate. Available in sizes from 18U to 47U, with standard footprints including 600x800mm and 800x1000mm to ensure maximum airflow and cable clearance.
Single Section Wall Mount Cabinet
A sleek, locking box that mounts to your wall to keep small office networking gear safe and off the floor.
Double Section Wall Mount Cabinet
A smart wall-box that swings open from the back, letting you reach the cables behind your equipment without taking it apart.
Outdoor Cabinets (IP 65/66)
Weather-proof IT enclosures built to protect your tech from Saudi Arabia’s intense heat, sand, and rain, available in wall mount (7U–24U) and floor stand (12U–47U) models.

PDUs & Accessories

Industrial Power Distribution Units
High-performance power hubs built to handle heavy-duty machinery and large-scale electrical loads without failing.
Power Distribution Units
Professional-grade power strips that ensure your servers, switches, and all other devices get a steady, safe flow of electricity at all times.
Digital Temperature Unit
A smart thermostat for your rack that monitors heat levels in real-time to prevent your equipment from crashing.
Cable Management Shelf
A simple but vital tool that keeps your data cables from becoming a tangled mess, making repairs much faster.
Fan Units
High-speed cooling fans that pull hot air out of your cabinet to keep your hardware running at the perfect temperature.

Fiber Optic Infrastructure

Single-Mode (SMF)

Ultra-thin glass core that carries one light signal at a time, perfect for long-distance telecommunications and large campus networks that span many miles.

Multi-Mode (MMF)

Wider glass core that carries multiple light signals simultaneously, ideal for shorter distances like data centers and local networks within buildings or campuses..

Intelligence That Protects

Hybrid Integration

Seamless connectivity with Access Control, Fire Alarm, and Public Address systems to create a unified "Safe Building" architecture.

Storage Architecture

Scalable NVR and Storage Server solutions utilizing H.265 Advanced Compression to maximize storage efficiency without compromising forensic video quality.

c1
Armored Cables

Contains a layer of steel tape or wire underneath the jacket. This is mandatory for direct burial to stop rodents from chewing through the fiber.

c1
Loose Tube Cables

The industry standard for outdoor use. Fibers float inside a tube to isolate them from outside tension and water.

c1
Aerial Cables

Highly specialized cables with heavy armor and water-blocking gel for lakes or oceans.

c2
Simplex Cables

A single fiber strand. Used for one-way data transmission or patch cords.

c2
Duplex Cables

Two fibers joined together (often called "zipcord"). Used for synchronous communication between devices (transmit/receive).

c2
Ribbon Cables

Flat cables where fibers are bonded side-by-side. Used for high-density environments (data centers) where space is limited.

Powered by Global Industry Leaders

We partner with world-class manufacturers to ensure compatibility, performance, and reliability across every installation.

mr
uniflex
estap
dl
eccel
mmc
3m
b2
cm
pnf

Our strategic partnerships guarantee that every component meets international standards and delivers exceptional long-term value.

UTP (Copper) - Passive Components

01

Patch Panels
rack-mount hub for organizing network cables, available in 24-port (1U) or 48-port (2U) sizes and offered in both unloaded modular or pre-loaded CAT6/CAT6A versions.

02

Keystone Jacks
The actual RJ45 jacks that snap into panels or wall outlets (CAT6, CAT6A, Shielded/Unshielded).

03

Patch Cords
Factory-terminated cables for connecting switches to panels or PCs to wall outlets (various lengths and colors)

04

Cable Management
The organizers. Horizontal managers (finger duct or ring type) to keep the rack looking clean and professional.

05

Wall Outlets (Faceplates)
The wall endpoints. Single, dual, and quad port faceplates that go on the user's wall.

Fiber Optic - Passive Components

01

Fiber Enclosures (ODFs)
Optical Distribution Frames A metal box that sits in the rack to protect the delicate fiber connections.

02

Fiber Pigtails
For splicing. Short fibers with a connector on one side, used to fusion splice to the main cable.

03

Fiber Patch Panel
Rack-mount "switchboard" used to connect main fiber cables, typically available in 12, 24, 48, or 96-port versions depending on the size of the office or data center.

04

Fiber Patch Cords
Serve as the essential link between the distribution frame and active equipment, supporting multiple interface standards including LC-LC, SC-LC, and SC-SC.

05

Splice Trays & Accessories
The protection. Trays to hold the fusion splices safely inside the ODF, plus protection sleeves.

Our Core Values

a1 (1)
Innovation

Leading with next-gen standards like Cat 8 and advanced fiber to keep clients ahead of technological curves.

a2 (1)
Customer First

Tailoring every infrastructure design to maximize longevity, performance, and return on investment.

a3 (1)
Integrity

Building trust through transparency, ethical practices, and unwavering commitment to quality.

In a secure world, the quality of your surveillance defines the safety of your assets. A superior security system is not just about recording; it is about empowering total situational awareness.

Get in Touch

Don't let power instability disrupt your business. Contact us today to build a future-proof power protection architecture tailored to your needs.

Mobile: +966 550712330

Telephone: +966 12 4233243

Email: sales@ei-sa.com | support@ei-sa.com

Location: Jeddah Head Office: 8045 Al-Madinah Branch Road, 2276 Al Faisaliyah Dist. 23442 Postal Code
Kingdom of Saudi Arabia

Contact us